Safety Compliance UK » Inspection Services & LOLER

Inspection Services & LOLER

competent-person

Our trained and competent inspectors will ensure your safety harness inspections (and associated climbing equipment) happen efficiently, on schedule and with minimal disruption to your business.

Project Health & Safety Advisors

Thorough examination of lifting equipment and accessories is a legal requirement under the Lifting Operations and Lifting Equipment Regulations (LOLER).

Project Health & Safety Advisors

Personal Fall Protective equipment should ideally be visually inspected every 6 months, and fully inspected and certified every 12 months.

competent-person

S & C Safety Compliance Fall Protection Solutions can provide an inspection service scheme offered on an annual basis for new and existing access step overs and other rooftop installation works

Project Health & Safety Advisors

An S & C Safety Compliance Roof Asset Survey will tell you everything you need to know to create a knowledge base, and a platform for cost effective planned maintenance of your roof.

Project Health & Safety Advisors

It is a legal requirement for safety lines to be inspected, swage tested and certified at least every 12 months.

competent-person

Guardrails should be inspected at least every 12 months.

Project Health & Safety Advisors

It is vital to have your walkway system inspected every 12 months to EN 516 to remain compliant and safe.

Project Health & Safety Advisors

At least once every 12 months each anchor device should be
subject to a periodic examination in accordance with the manufacturers instructions

competent-person

It is a legal requirement to have all access ladders visually inspected every 12 months to BS 4211:2005.

Project Health & Safety Advisors

All eyebolts, with the exception of abseil point eyebolts, are required to be compliance tested every 12 months via a pull tester to 6kn for 30 seconds.

Project Health & Safety Advisors

It is vital to have the system tested annually to guarantee the equipment is fit for use, especially in case of an emergency.

competent-person

S & C Safety Compliance can install, retest and certify anchorage systems and support brackets, for the suspension of cross street and building mounted festive lighting.